Jonathans Blog

Well week 2 has commenced and yesterdays lesson was great. We did a serious run through of the play and it looked as though everyone had gotten the gist of it. Personally due to the lack of lines in the play i chose to have a small meeting with Kimmi to get things outta the way. We discussed various issues concerning lighting and stage craft. Issues like HOW we are going to work cooperatively with each other in the most effective way.

I also brought up a number of issues with it being slightly irrelevant at the time but i figured I’d rather get them out then keep them in and forget them. So for the most part people disagreed with my BYO idea, because it might offend the principle and various other school hierarchies.

But my question to all of you is this. You seem to be concerned of the highly unlikely event of kids getting drunk, but not of the extremely grotesquely explained references to a mans genitalia?

That’s my 2 cents.

Until next time,

moondy

Hi all,

Just an update surely all should know about. I have just landed the job of being Stage Manager! I think its an awesome title but with great power comes great responsibility. So I’ll do whatever i can to make sure you all get the most out of my amatureish style of thinking (however of course I’ll be learning along the way). So now technically i have 4 jobs! From most important to least important are:

Stage Manager

Lighting

Acting (simple role with no lines, wont require too much learning on my part as i will simply hand over the Stage Manger job over to Scotty and he will take care of it for a minute. Plus i have the script in front of me a lot of the time so i wont need to learn enter and exit ques back to front.)

Multimedia (very little things like our logo, but still collaborates with Kim and willing to help out at promotion whenever needed.)

The 2 in bold are my main concerns obviously. I’ll of course give an even effort at all my roles. I’ll make sure that the Stage Management and Lighting is taken care of BEFORE anything else.

So from a difficult task transformed into mammoth challenge from this new role, i really do think it will be a fun and productive combination and i hope to get as much out of it as possible.

Until next time,

moondy

Once again another great session by scotty where we got a master class on all the technical mumbo jumbo. It was mainly revolved around the lighting effects, thankfully making my understatement of the whole lighting technicalities a reality. We began the class looking at the numbers involved in any major production, and it really gave us a great understanding on just how expensive it is to present even a small VCE play. Once we discussed the ideas on how and what to charge for our performances, we were taken into the PAC where we got the privilege to get up close and personal with the mammoth lighting equipment. It was most beneficial to me more then anyone else as i am in charge of lighting, i have to get my terms right so that i’m able to call the shots in the correct slang for the techies.

Due to my poor handwriting i asked our director Scott to take notes on my behalf. Also, i gained a better insight by not having the distraction of taking notes, so it was good to just zone in and hang on every word he said. He seemed to know what he was talking about in every way, he would probably be the best guy to ask when i have completed my first draft lighting plan. Some of the lighting equipment terms really ran over my head, the names were just pretty hard to remember and doesn’t have anything to do with what the light actually does.

 Nevertheless i have constructed a small list of terms here for future reference.

• Gobo: The Gobo is a light that has the ability to split the beam up in certain shapes. You cant add colours. This is probably best used for zoning in on specific areas, highlight crucial characters at the right time. This helps direct the audience where to look.
• Fresnel: A Fresnel is a light that is probably used for a more general lighting effect. The Fresnel has soft edges so it would be used to light up a stage as a general rule. You can add certain colours but its not as controllable as the Gobo.
• Intelligent Light: An Intelligent Light is just what the name suggests. It has the ability to track a character with using signals to and fro the light and the human (using a signal box attached to the human). It can also be operated manually by an operator and has the ability to be a soft or hard edge and can change to any colour desired automatically using a set of pre-configured commands. It is however very expensive and it would most likely not be used within our performance due to the tiny scale and limited movement of our characters. Of course this is not a final ruling.
• Profile- The Profile is the correct name for the light known as the spot light. As the name is self explanatory, the idea of its purpose is simply highlighting an actor and has the ability to focus. Gels can be added but needs to be added manually.
• Parcan: Similar to the Fresnel, its much larger and sports a soft edge spot light.
• Gels: Gels are the coloured disks that can be inserted or already installed in certain lights to give a different colour effect. They are commonly used in most theatre productions as they can have a profound impact on audiences reaction to certain colours (like red suggesting ‘evil’ force is about to be reckoned with).

LX stands for Lighting Effects. Its based around the concept of the well known term FX (Video Effects).

My job now is to sit down and work out where i am able to put down different LX’s instead standard ‘down light’ effect. Many questions are still being decided upon by me and my fellow crew and i hope we can all work together to fully understand and collaborate responsibilities to give everyone a better chance at perfection.

Until next time,

moondy

What can I say? The end of week one and we’re pumped as never before experienced by what’s left of our 2006 class.  Our script has been chosen, roles been set and we’re ready to perform like professionals. The script chosen ‘After Dinner’ encompasses the humour of Adult themes yet allows it to be tidied up for an audience of all ages. The scene is set at a bistro in the late 1980’s as 3 women and a couple of men find their way sitting parallel to one another. The conversations that take place are sometimes quick paced and guaranteed to raise the roof. The idea of the play is to engage the audience on a realism most likely never done before in a Scopus production.

So far the lighting is going pretty well in terms of research.  I have found a number of interesting techniques but unfortunately due to a lack of knowledge i have not thrown myself on top of one particular idea. The text book examples  (which happen to be of ‘After Dinner’) really gave me some great ideas but i have yet to put them down to paper (mainly because i cant draw for shit).

Acting is somewhat a lesser role for me as i have no talking parts in the play, which can be said to make life a lot easier. However, i do believe i will be working as hard as anyone else of the other performers. I have to make sure the audience can relate to the same experiences that they might have had with a rude and downright prick of a waiter.

I have given myself the task of updating this blog at least once a week but i will most likely have to pile on the blogs when the load of work starts to get to much to keep in me

Until next time,

moondy

Hey guys,

I figured i’d help you all work out how to set up your blog so hear it is.

Its very simple as scotty was explaining but instead of annoying him by asking questions even he doesn’t know about, scotty might learn something too

Signing up:

Signing up is very simple and consists of only a few simple steps.
 

Step 1: Goto the www.vineblogs.net homepage and under ‘Create your own’ will be 3 boxes. In the first box named user name, will be your blog address. So for example i type in ‘Jeffery’ and my address will be www.jeffery.vineblogs.net . Hint: Try to make it as easy as possible to remember and try not too include anything other then letters. Now for the second box just put in your first name or a nickname, you can change that later on. And finally for the 3rd box put in your email address. A randomly generated password will be sent there. It might also be wise to archive it in case you forget your password (which can be changed to one you will remember once you log in.)

Step 2: Ok you now have the email in your inbox, so click on the link it gives you and copy and paste the password in (makes it quicker for people with bad memories like me ). Now that your logged in, you might want to make a post like what im doing now. Goto ‘write’ and the edit box is much like word, with a few exceptions.

Uploading an image:

If you want to upload a picture from YOUR computer, look under the edit box in ’Write>Write post’ and you will see a ’Upload’ box. Click ‘Browse’ and search for the image that you want, click on that and it will automatically put the picture address in the File box (An example of what it may look like…C:/My documents/My pictures/myface.jpg). The rest is self explanatory, add the Title to your picture and if you wish add a description write in that box. Then upload, goto Browse and drag and drop the picture you want to this box. You can enlarge the picture up to a certain size before you start seeing the quality deteriorate. The reason is simple, the lower the amount of information the user needs, the faster it will load up. They make it just good enough to get an idea of what the picture looks like.

My 2nd design logo concept, yet to be agreed on by master of publicity, Kim.

Linking your site to Scottys:

If i recall correctly Scotty said he wants his pages to be the central point of the company. So what we need to do is link up the page. How? Well…

• Look on the top light blue line and you will see ‘Links’, click on that.
• Next you will see another darker blue line (navy blue). This is the sub links bar. Click on ‘Add links’.
• Now make sure you know what scottys address is, yes you guessed it www.scotty.vineblogs.net .
• Put that into the ‘URL’ bar
• Now in ‘Link name’ put in Scotty
• In ‘Short Description’ just put something like ’scottys home page’

Ignore the rest of the options as those are few advances users and are pointless to us for now. That’s it you are now linked up! Make sure scotty has your address as well so he can add you too. If you wish to link to everyone else’s blog then do so in the same manner.

To change your password:

If you want to change your password to something you’ll remember a lot easier then goto ‘Users’ and make sure your in the sub link ‘Profile’. Now scroll down and you will see the option to change a password. Simply type in your new password twice (2nd time to confirm you dont make a typo) and click update profile. You can change a lot of other options in the ‘Profile’ section as well.

To change the look of your page:

Goto ‘Presentation’ and make sure your sub link is on ‘Themes’. Now click on a theme you want and walla your done. To change the heading colour (only avalible on certain themes) just click on the link next to themes and pick the text colour you want, then the upper and lower section of the background and mix and match for a cool colour coordination.

That’s about all you guys really need to know, if you want to know something else then just comment and ill update my blog to accommodate your question.

Thanks for reading,

Moondy